ENGINE (J05E)/TROUBLESHOOTING
2–744
INSPECTION PROCEDURE: P119F
1.
Set the starter key to the "LOCK" position.
2.
Connect the vehicle to HINO DX
Ⅱ
.
3.
Set the starter key to the "ON" position.
4.
Select [Engine] and check if any DTC other than P119F (for exam-
ple, P0192, P0193, P01A5, P01A6) have been detected.
NO
YES
1.
Check the connection of the common rail pressure sensor connec-
tor (looseness and poor contact).
NO
YES
1
Check the DTC detected 1 (Engine ECU)
SHTS021270300676
Has a DTC (P0192, P0193, P01A5, P01A6) other than P119F been detected?
Go to the diagnostic procedure of a related
DTC.
Go to step 2.
2
Inspect the common rail pressure sensor connector
Was any failure found?
Connect securely, repair if needed.
Perform "After-inspection work" of INFOR-
MATION section.
Go to step 3.