ENGINE (J05E)/TROUBLESHOOTING
2–352
1.
Disconnect the target's injector harness connector.
2.
Use the electrical tester to measure the resistance between the
terminals in the target's injector harness connector (injector side).
NO
YES
1.
Measure the resistance between the target's injector terminal and
the injector body.
NO
YES
5
Inspect disconnection of the injector harness
SHTS021270300317
Measurement
conditions
Tester
connections
Standard values
Starter key: LOCK
Injector harness
connector (injec-
tor side) terminals
20
C {68
F}:
0.37
–
0.57
Do the measurements meet the standard value?
Repair or replace the wire harness between
the injector central connector and injector
harness connector.
Perform "After-inspection work" of INFOR-
MATION section.
Go to step 6.
6
Inspect the injector unit
SHTS021270300318
Measurement
conditions
Tester
connections
Standard values
Starter key: LOCK
Injector terminal
–
injector body
More than 10 M
Do the measurements meet the standard value?
Repair or replace the target's injector har-
ness.
Perform "After-inspection work" of INFOR-
MATION section.
Replace the injector.
Perform "After-inspection work" of INFOR-
MATION section.
