ENGINE (J05E)/TROUBLESHOOTING
2–371
1.
Set the starter key to the "LOCK" position.
2.
Disconnect the intake throttle valve position sensor 2 connector.
3.
Use the electrical tester to measure the resistance between the
terminals of the intake throttle valve position sensor 2.
NO
YES
3
Inspect the intake throttle valve position sensor 2 unit
VTA2
VC
E2
VC
E2
VTA2
SHTS021270300332
Measurement
conditions
Tester
connections
Standard values
Starter key: LOCK
Intake throttle
valve position
sensor 2
(1) VC
–
VTA2
(2) VC
–
E2
(3) VTA2
–
E2
(1) 180
(2) 3 k
(3) 3 k
Do the measurements meet the standard value?
Go to step 4.
Replace the intake throttle valve position
sensor 2.
Perform "After-inspection work" of INFOR-
MATION section.