ENGINE (J05E)/TROUBLESHOOTING
2–288
1.
Set the starter key to the "LOCK" position.
2.
Replace common rail assembly.
3.
Perform the engine warm up. (engine coolant temperature: 80
C
{176
F} or more)
4.
Stop the engine.
5.
Set the starter key to the "ON" position.
6.
Select [Engine] and check if the DTC (P0148) has been detected.
NO
YES
1.
Check that the injector clamp is not loose.
2.
Check that there is no "insufficient engagement" of the injector
clamp claw.
NO
YES
8
Replace the common rail assembly [HINO DX
Ⅱ
]
SHTS021270300265
Has DTC (P0148) been detected?
Go to step 9.
Procedure completed.
9
Check the injector clamp
INJECTOR
INJECTOR
CLAMP
BOLT
INJECTION PIPE
INJECTION
PIPE OIL SEAL
O-RING
SHTS021270300266
Was any failure found?
Repair or replace the faulty parts.
Go to step 10.
