ENGINE (J05E)/TROUBLESHOOTING
2–403
1.
Check that the pre fuel filter is not dirty or clogged or damaged.
NO
YES
1.
Perform the engine warm up. (engine coolant temperature: 80
C
{176
F} or more)
2.
Stop the engine.
3.
Set the starter key to the "ON" position.
4.
Select [Engine] and check if the DTC (P026C or P026D) has been
detected.
NO
YES
4
Inspect the pre fuel filter
Was any failure found?
Replace the pre fuel filter.
Go to step 5 after replacement.
Go to step 5.
5
Check the DTC detected (Engine ECU)
SHTS021270300365
Has DTC (P026C or P026D) been detected?
Go to step 6.
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.