ENGINE (J05E)/TROUBLESHOOTING
2–705
1.
Set the starter key to the "ON" position.
2.
Use the electrical tester to measure the voltage between each ter-
minal in the main relay vehicle side connector (inside chassis relay
block B) and ground.
NO
YES
3
Inspect the main relay power supply circuit
B
B2
B
B2
EDU RELAY
SHTS021270300644
Measurement
conditions
Tester
connections
Standard values
Starter key: ON
Main relay vehicle
side connector
B
–
Ground
B2
–
Ground
10 V or more
Do the measurements meet the standard value?
Go to step 4.
Repair or replace the main relay power sup-
ply circuit.
Perform "After-inspection work" of INFOR-
MATION section.