ENGINE (J05E)/TROUBLESHOOTING
2–397
1.
Perform the engine warm up. (engine coolant temperature: 80
C
{176
F} or more)
2.
Stop the engine.
3.
Remove the air cleaner.
4.
Remove the all injectors.
5.
Set the special service tool (SST) and measure the compression
on each cylinder one at a time on all 6 cylinders.
NO
YES
11
Check the engine compression pressure
SST
To
engine
SHTS021270300358
Measurement
conditions
Standard values
Engine revolution:
150 r/min
Standard values:
3.2-3.4 MPa {33-35 kgf/cm
2
}
Limit: 2.3 MPa {24 kgf/cm
2
}
Do the measurements meet the standard value?
Go to step 12.
Repair base engine to correct low compres-
sion.
Perform "After-inspection work" of INFOR-
MATION section.