ENGINE (J05E)/TROUBLESHOOTING
2–372
1.
Set the starter key to the "ON" position.
2.
Use the electrical tester to measure the voltage between the termi-
nals of the intake throttle valve position sensor 2 vehicle side con-
nector.
NO
YES
1.
Set the starter key to the "LOCK" position.
2.
Use the electrical tester to measure the resistance between the
terminals of the intake throttle valve position sensor 2 vehicle side
connector.
NO
YES
4
Inspect the intake throttle valve position sensor 2 power supply
VC
E2
SHTS021270300333
Measurement
conditions
Tester
connections
Standard values
Starter key: ON
Intake throttle
valve position
sensor 2 vehicle
side connector
VC
–
E2
4.5
–
5.5 V
Do the measurements meet the standard value?
Go to step 5.
Go to step 6.
5
Inspect the intake throttle valve position sensor 2 signal circuit
VTA2
E2
SHTS021270300334
Measurement
conditions
Tester
connections
Standard values
Starter key: LOCK
Intake throttle
valve position
sensor 2 vehicle
side connector
VTA2
–
E2
25
–
35 k
Do the measurements meet the standard value?
Go to step 8.
Go to step 6.