ENGINE (J05E)/TROUBLESHOOTING
2–341
1.
Set the starter key to the "LOCK" position.
2.
Disconnect the common rail pressure sensor connector.
3.
Measure the resistance between the terminals of the sensor using
the electrical tester.
NO
YES
3
Inspect the common rail pressure sensor unit
VC1
PCR1
PCR1
E1
E2
(main)
PCR2
(main)
VC2
(main)
VC1
(sub)
PCR1
(sub)
E1
(sub)
E2
(main)
PCR2
(main)
VC2
(main)
E1
(sub)
VC1
(sub)
PCR1
(sub)
SHTS021270300305
Measurement
conditions
Tester
connections
Standard values
Starter key: LOCK
Common rail pres-
sure sensor
(1) VC1 (sub)
–
PCR1 (sub)
(2) PCR1 (sub)
–
E1 (sub)
(1) 1.05
–
3.55 k
(2) 6.7
–
18.7 k
Do the measurements meet the standard value?
Go to step 4.
Replace the common rail pressure sensor.
Perform "After-inspection work" of INFOR-
MATION section.