ENGINE (J05E)/TROUBLESHOOTING
2–415
1.
Set the starter key to the "LOCK" position.
2.
Disconnect the boost pressure sensor connector.
3.
Set the starter key to the "ON" position.
4.
Use the electrical tester to measure the voltage between the termi-
nals of the boost pressure sensor vehicle side connector.
NO
YES
3
Inspect the boost pressure sensor power supply system
E
VC
SHTS021270300378
Measurement
conditions
Tester
connections
Standard values
Starter key: ON
Boost pressure
sensor vehicle
side connector
VC
–
E
4.75
–
5.25 V
Do the measurements meet the standard value?
Go to step 4.
Inspect the harness and engine ECU.
Perform "After-inspection work" of INFOR-
MATION section.