ENGINE (J05E)/TROUBLESHOOTING
2–63
1.
Disconnect the J/C_HV1 connector.
2.
Use electrical tester to measure the resistance between No.4
(CANH) terminal and No.9 (CANL) terminal at the J/C_HV1 con-
nector.
NO
YES
2
Check harness in CAN bus line between J/C_HV1 and J/C DEF SSR (Failure Site 11)
SHTS021270300044
Measurement
conditions
Tester
connections
Standard values
Starter key: LOCK
J/C_HV1 connec-
tor
No.4 (CANH)
–
No.9 (CANL)
110
–
130
Do the measurements meet the standard value?
Connect the J/C_HV1 connector, and go to
step 3.
CAN bus line disconnection between J/
C_HV1 and the J/C DEF SSR
Repair or replace the harness.
Perform After-inspection work. (Clear all past
DTC. Check no DTC is stored after test
drive.)
