ENGINE (J05E)/TROUBLESHOOTING
2–432
1.
Warm up the engine. (engine coolant temperature: 80
C {176
F}
or more)
2.
Stop the engine.
3.
Remove the all injectors
4.
Set the special service tool (SST) and measure the compression.
NO
YES
1.
Warm up the engine. (engine coolant temperature: 80
C {176
F}
or more)
2.
Stop the engine and the starter key to the "ON" position.
3.
Select [Engine] and check if the DTC (P0301, P0302, P0303 or
P0304) has been detected.
NO
YES
7
Check the engine compression pressure
SST
TO
ENGINE
SHTS021270300398
Measurement conditions
Standard values
Engine revolution: 150 r/min
3.2
–
3.4 MPa
{33
–
35 kgf/cm
2
}
Limit: 2.3 MPa {24 kgf/cm
2
}
Do the measurements meet the standard value?
Go to step 8.
Overhaul the engine.
Perform "After-inspection work" of INFOR-
MATION section.
8
Check the DTC detected (Engine ECU)
SHTS021270300399
Has DTC (P0301, P0302, P0303 or P0304) been detected?
Replace the engine ECU.
Perform "After-inspection work" of INFOR-
MATION section.
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.