ENGINE (J05E)/TROUBLESHOOTING
2–408
1.
Perform an engine warm up. (engine coolant temperature: 80
C
{176
F} or more)
2.
Stop the engine.
3.
Remove the all injectors.
4.
Set the special service tool (SST) and measure the compression.
NO
YES
11
Check the engine compression pressure
SST
To
engine
SHTS021270300371
Measurement
conditions
Standard values
Engine revolution:
150 r/min
Standard values:
3.2-3.4 MPa {33-35 kgf/cm
2
}
Limit: 2.3 MPa {24 kgf/cm
2
}
Do the measurements meet the standard value?
Go to step 12.
Engine overhaul.
Perform "After-inspection work" of INFOR-
MATION section.