ENGINE (J05E)/TROUBLESHOOTING
2–597
1.
Set the starter key to the "LOCK" position.
2.
Disconnect the exhaust gas temperature sensor (DOC1 inlet) con-
nector.
3.
Use the electrical tester to measure the resistance between the
terminals of the exhaust gas temperature sensor (DOC1 inlet).
NO
YES
3
Inspect the exhaust gas temperature sensor (DOC1 inlet) unit
GND
TOIL
SHTS021270300545
Measurement
conditions
Tester
connections
Standard values
Starter key: LOCK
Exhaust gas tem-
perature sensor
(DOC1 inlet)
TOIL
–
GND
20
C {68
F}:
15.4
–
25.9 k
50
C {122
F}:
7.9
–
12.2 k
80
C {176
F}:
4.5
–
6.5 k
Do the measurements meet the standard value?
Go to step 4.
Replace the exhaust gas temperature sensor
(DOC1 inlet).
Perform "After-inspection work" of INFOR-
MATION section.
