ENGINE (J05E)/TROUBLESHOOTING
2–241
1.
Set the starter key to the "LOCK" position.
2.
Disconnect the engine coolant temperature sensor 2 connector.
3.
Use the electrical tester to measure the resistance between the
terminals of the engine coolant temperature sensor 2.
NO
YES
1.
Set the starter key to the "ON" position.
2.
Use the electrical tester to measure the voltage between the termi-
nals of the engine coolant temperature sensor 2.
NO
YES
9
Inspect the engine coolant temperature sensor 2 unit
E22
THW2
SHTS021270300219
Measurement
conditions
Tester
connections
Standard values
Starter key: LOCK
Engine coolant
temperature sen-
sor 2
THW2
–
E22
20
C {68
F}:
2.59
–
2.32 k
80
C {176
F}:
0.326
–
0.310 k
Do the measurements meet the standard value?
Go to step 10.
Replace the engine coolant temperature sen-
sor 2.
Perform "After-inspection work" of INFOR-
MATION section.
10
Inspect the engine coolant temperature sensor 2 power supply
THW2
E22
SHTS021270300220
Measurement
conditions
Tester
connections
Standard values
Starter key: ON
Engine coolant
temperature sen-
sor 2 vehicle side
connector
THW2
–
E22
4.5
–
5.5 V
Do the measurements meet the standard value?
Go to step 13.
Go to step 11.
