Hill-Rom Advanta P1600, Service Manual

Page: 79 / 429

Function Checks
Chapter 2: Troubleshooting Procedures
Advanta™ Bed Service Manual (man168ra) Page 2 - 13
2
2-10). Press the All Motors switch (A) to deactivate the motor power if
necessary (see figure 2-3 on page 2-13).
Figure 2-3. Footboard Control Panel—All Motors Switch
2. To activate the control panel switch/LED test, press and hold the chair in,
chair out, bed up, and bed down switches simultaneously for 4 seconds
(see figure 2-4 on page 2-13).
Figure 2-4. Footboard Control Panel Switch/LED Indicator Test
3. Press each of the switches indicated in table 2-2 on page 2-14 one at a time.
Confirm that its LED, plus the corresponding information LED indicator
named in the table, illuminates (when appropriate).
NOTE:
If a switch closure is not detected during any 5 second period, this test will end,
and the footboard control panel will return to its previous state.
m168_138
m168_139