Hill-Rom Advanta P1600, Service Manual

Page: 41 / 429

Model Identification
Chapter 1: Introduction
Advanta™ Bed Service Manual (man168ra) Page 1 - 23
1
Thermal resets are an integral part of the motors, protecting them in the event
there is an overload condition. They stop the motor automatically if it heats up
to a certain temperature. The motor will not run again until the motor cools. All
Advanta™ Bed motors are equipped with automatic thermal resets that allow
the motor to operate after it has cooled down.
Limit Switches
Limit switches determine the drive screw end-of-travel limit. The head, knee,
and hilow drive assemblies all have limit switches to keep the bed from
exceeding its mechanical limits and being damaged.
Regulations, Standards, and Codes
• UL-listed, UL544, Medical/Dental
• CSA®
1
Standard C22.2 #125 Electro medical equipment
Model Identification
For Advanta™ Bed model identification, see table 1-2 on page 1-23.
Table 1-2. Model Identification
1. CSA® is a registered trademark of Canadian Standards Association.
Model Number Description
P1600A Advanta™ Bed
P1600B Advanta™ Bed with redesigned arhitecture for
new PPM system.