Hill-Rom Advanta P1600, Service Manual

Page: 388 / 429

6.1 Scale Calibration
Chapter 6: General Procedures
Page 6 - 4 Advanta™ Bed Service Manual (man168ra)
NOTE:
The display reads CAL0, indicating that the bed is zeroing.
7. Avoid touching the bed.
NOTE:
When the display reads CAL1, the bed is zeroed.
8. When one tone sounds, add the calibration weight to the left foot section.
9. Wait approximately 30 s. The display reads CAL2.
10. When two tones sound, remove the calibration weight from the left foot
section.
11. Wait approximately 30 s. The display reads CAL3.
12. When three tones sound, add the calibration weight to the left head section.
13. Wait approxiately 30 s. The display reads CAL4.
14. When four tones sound, remove the calibration weight from the left head
section.
15. Wait approximately 30 s. The display reads CAL5.
16. When five tones sound, add the calibration weight to the right head section.
17. Wait approximately 30 s. The display reads CAL6.
18. When six tones sound, remove the calibration weight from the right head
section.
19. Wait approximately 30 s. The display reads CAL7.
20. When seven tones sound, add the calibration weight to the right foot
section.
21. Wait approximately 30 s. The display reads 100.0, and one tone sounds.
22. Use the Plus + and Minus - switches to adjust the weight up and down to
the calibration weight.
23. When the correct weight is displayed, press and release the Change Items
switch.