Hill-Rom Advanta P1600, Service Manual

Page: 63 / 429

Safety Tips
Chapter 1: Introduction
Advanta™ Bed Service Manual (man168ra) Page 1 - 45
1
CAUTION:
Use caution when removing the air hoses from the air sleep surface
solenoid. The fittings are plastic and can break if handled too roughly
during the removal process.
CAUTION:
Failure to align the slide switch and drive screw when installing the
hilow head drive screw can cause severe damage to the bed.
CAUTION:
Failure to align the slide switch and drive screw when installing the
hilow foot drive screw can cause severe damage to the bed.
CAUTION:
Do not lower the foot section while the knee section is down and the
foot end cover is removed. Severe damage to the bed can occur.
CAUTION:
Failure to align the slide switch and drive screw when installing the knee
drive screw assembly can cause severe damage to the bed.
CAUTION:
Crank the head screw assembly clockwise only. The actuator on the
limit switch and the lift nut can become damaged if you crank the head
screw assembly counterclockwise.
CAUTION:
Do not manually crank the drive screw assemblies past the low or high
limits. Equipment damage could occur.
CAUTION:
If your bed is equipped with the Patient Position Monitor, do not set
heavy objects directly on the pressure switches. Damage can occur to
the pressure switches.