Hill-Rom Advanta P1600, Service Manual

Page: 263 / 429

4.27 CPR Release Handle
Chapter 4: Removal, Replacement, and Adjustment Procedures
Advanta™ Bed Service Manual (man168ra) Page 4 - 79
4
4.27 CPR Release Handle
Tools required: 1/2" open end wrenches (2)
Adjustment
1. Remove the head end covers (see “Head End Covers” on page 4-13).
2. Using the 1/2" open end wrenches, loosen both jam nuts (A) and (B) on the
back side of the CPR release handle (see figure 4-34 on page 4-79).
Figure 4-34. CPR Release Handle
3. Locate the cable ball stops (C) as they pass through the latch release bar
(D) on the CPR release mechanism (see figure 4-35 on page 4-80).
m168_067