Hill-Rom Advanta P1600, Service Manual

Page: 128 / 429

2.23 Scale Display—Err0, Err1, Err2 or Err3 Displayed
Chapter 2: Troubleshooting Procedures
Page 2 - 62 Advanta™ Bed Service Manual (man168ra)
This solves the problem.
Yes No
↓ →
Call Hill-Rom Technical Support at (800) 445-3720.
2. Go to “Final Actions” on page 2-17.
Err1
1. The scale displays Err1 and beeps ten times. An error has occurred during
the memory check. Calibrate the scale to correct this problem (refer to
procedure ).
This solves the problem.
Yes No
↓ →
The Advanta™ Bed scale can compensate for items that are
added to or removed from the bed. Use the scale control panel to
add or remove items on the bed (see “Changing Items on the
Bed” on page 1-38). Check the scale calibration procedures
again (refer to procedure ). If this solves the problem, go to
“Final Actions” on page 2-17. Otherwise, call Hill-Rom
Technical Support at (800) 445-3720.
2. Go to “Final Actions” on page 2-17.
Err2
1. The scale displays Err2 and beeps ten times. The scale has never been
calibrated. Calibrate the scale to correct this problem (refer to procedure ).
This solves the problem.
Yes No
↓ →
The Advanta™ Bed scale can compensate for items that are
added to or removed from the bed. Use the scale control panel to
add or remove items on the bed (see “Changing Items on the
Bed” on page 1-38). Check the scale calibration procedures
again (refer to procedure ). If this solves the problem, go to
“Final Actions” on page 2-17. Otherwise, call Hill-Rom
Technical Support at (800) 445-3720.
2. Go to “Final Actions” on page 2-17.
Err3
1. The scale alternately displays Err3 and a PX code. The X refers to a
connection number from 1 through 4 on the analog P.C. board. Check this