Hill-Rom Advanta P1600, Service Manual

Page: 284 / 429

4.32 Siderail Controls and Speakers
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 100 Advanta™ Bed Service Manual (man168ra)
11. To remove the speaker (I), disconnect the wires.
12. Using the 1/4" nut driver, remove the nuts (J), and separate the speaker (I)
from the siderail.
Replacement
1. Install the bed position P.C. board (H), if applicable, and secure it to the
siderail frame with the screw (G).
2. Install the optional nurse call/entertainment P.C. board (F), if applicable.
3. Using the 1/4" nutdriver, install the speaker (I), if applicable, and secure it
with the nuts (J).
4. Connect the speaker wires, if applicable.
5. Connect the cables to the caregiver bed position switch (D), and the
optional caregiver bed exit switch (E), as applicable.
6. Using the phillips head screwdriver or the T10 Torx® head screwdriver,
install the caregiver control panel (C), and secure it to the siderail with the
5 screws (B).
7. Install the new screw covers (A) in the screw holes.
8. Plug the bed into an appropriate power source.
9. Test the siderail switches and speaker to ensure the bed is working
properly.
10. To ensure proper operation of the Advanta™ Bed, perform the “Function
Checks” on page 2-6.