Hill-Rom Advanta P1600, Service Manual

Page: 296 / 429

4.37 Scale/PPM Control P.C. Board
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 112 Advanta™ Bed Service Manual (man168ra)
Figure 4-52. Scale/PPM Control P.C. Board
6. Using the 3/8" nut driver, remove the three keps nuts (C).
CAUTION:
To prevent component damage, ensure that your hands are clean and
only handle the P.C. boards by their edges.
CAUTION:
When handling electronic components, wear an antistatic strap . Failure
to do so, could result in component damage.
7. Remove the Scale/PPM control P.C. board (B).
Replacement
1. Install the Scale/PPM control P.C. board (B) in the reverse order of
removal.
2. To ensure proper operation of the Advanta™ Bed, perform the “Function
Checks” on page 2-6.