Hill-Rom Advanta P1600, Service Manual

Page: 319 / 429

Weigh Frame Assembly
Chapter 5: Parts List
Advanta™ Bed Service Manual (man168ra) Page 5 - 13
5
Table 5-3. Weigh Frame Assembly
Item Number Part Number Quantity Description
1 6538603 (1600) 0 or 4 Dummy load beam assembly (beds with-
out scale/PPM)
2 6538602 (1600) 0 or 2 Load beam assembly, 18" (beds with
scale/PPM)
3 19124 (1600) 1 or 2 Large cable tie
4 43878 (1600) 2
Torx®
a
button head screw
5 4565804 (1600) 1 Ground strap assembly
6 43389 (1600) 4 Hilow Torx® screw
7 61992 (1600) 4 Base bumper
8 43656 (1600) 4 Shoulder bolt
9 43989 (1600) 4 Nylon washer
10 63669 (1600) 2 Bearing, lift arm
11 43926 (1600) 4 Hex flange locknut
12 63483PC (1600) 1 Weigh frame weldment
13 49521 (1600) 8 Torx® screw
14 43657 (1600) 2 Bushing—retracting arm
15 65773 (1600) 4 Load beam socket
16 43879 (1600) 0 or 1 Torx® button head screw (beds with
scale/PPM)
17 40723 (1600) 1 Logic switch
18 28837 (1600) 1 Hex nut (beds with scale)
19 63686PC (1600) 1 Circuit board cover (weigh frame with
scale/PPM only)
20 18148H01
(1600) 5 Open closed bushing (beds with
scale/PPM)
21 4975102 (1600) 1 Analog board (beds with scale/PPM)
22 42944 (1600) 1 Insulator (beds with scale)
23 44724 (1600) 0 or 1 Standoff spacer (beds with scale/PPM)
24 6372101 (1600) 1 Cable, bed exit to analog
25 6371904 (1600) 0 or 1 Cable assembly (blue) (beds with
scale/PPM)
26 4467811 (1600) 1 Transition connector (weigh frame with-
out scale/PPM only)