Hill-Rom Advanta P1600, Service Manual

Page: 29 / 429

Introduction
Chapter 1: Introduction
Advanta™ Bed Service Manual (man168ra) Page 1 - 11
1
After the CPR Release has been activated and the entire sleep surface is in the
flat position, the bed automatically resets itself for normal operation. The head
motor takes 30 seconds to resume its normal operation.
To operate the CPR Release:
Activate the CPR Release by pushing one of the red switches (A) on the side of
the release handle (B), and pulling out on the handle (see figure 1-5 on page
1-11). Then release the handle. The CPR Release handles are located on each
side of the head section of the bed.
Figure 1-5. CPR Release
If the head section is elevated less than 24°, the knee section may not flatten
completely when you activate the CPR release. If this happens, use the knee
down switch to lower the knee section to the flat position.
Casters
The bed is mounted on four precision bearing, swivel-type casters. Each caster
has molded polyurethane wheels. The wheels are easily removed for cleaning
or replacing.
m168_040