Hill-Rom Advanta P1600, Service Manual

Page: 408 / 429

7.2 Bed Extender Assembly—P9959
Chapter 7: Accessories
Page 7 - 6 Advanta™ Bed Service Manual (man168ra)
7.2 Bed Extender Assembly—P9959
Tools required: None
Installation of the Lower Retracting Frame
SHOCK HAZARD:
Unplug the bed from its power source. Failure to do so could result in
personal injury or equipment damage.
1. Unplug the bed from its power source.
2. Remove the footboard from the frame mounting posts (F).
3. Raise the upper retracting frame to allow access to the lower frame (G).
4. On the lower retracting frame bed extender, loosen both of the knobs (A)
and rotate both of the J-hooks (B) to the outside.
5. Attach the lower retracting frame bed extender to the frame mounting posts
(F) using the L-bracket mounting holes (C).
6. Rotate both of the J-hooks (B) under the footend corner of the bed frame,
and tighten both of the knobs (A).
7. Plug the retracting frame bed extender cable connector (D) into the bed
panel connector (E).
8. Replace the footboard onto the bed extender posts (H).