![Hill-Rom Advanta P1600 Service Manual Download Page 271](http://html1.mh-extra.com/html/hill-rom/advanta-p1600/advanta-p1600_service-manual_2134159271.webp)
4.29 Hilow Foot Drive Screw Assembly
Chapter 4: Removal, Replacement, and Adjustment Procedures
Advanta™ Bed Service Manual (man168ra)
Page 4 - 87
4
15. Using the screwdriver if necessary, remove the hilow straps (O) from the
torque cage (P).
16. Slide the hilow foot drive screw assembly toward the head end of the bed
until the screw (I) can be lifted from the keyhole slot.
17. Slide the assembly toward the foot end of the bed until the screw (H) can
be lifted from the keyhole slot, and remove the hilow foot drive screw
assembly from the bed.
Replacement
1. Install the hilow foot drive screw assembly on the bed so that the screw (H)
is inserted into the keyhole slot.
2. Slide the assembly toward the head end of the bed so that the screw (I) is
inserted into the keyhole slot.
3. Insert the hilow straps (O) into the slots on the torque cage (P), and secure
them with the pins (M) and clips (L).
4. Install the screws (J) and tighten securely.
CAUTION:
Failure to align the slide switch and the drive screw when installing the
hilow foot drive screw can cause severe damage to the bed.
5. Align the limit slide switch (S) and the drive screw (T) that are fastened to
the lift nut (U) and torque cage (P).
6. Verify that the hilow foot limit switch is correctly adjusted (see “Hilow
Foot Limit Switch” on page 4-89).
7. Tighten the screws (H) and (I).
8. Secure the limit switch cable (Q) to the thrust bracket (R) with cable ties.
9. Install the circuit board pan (F), and secure it with the screw (D) and nut
(E) (see figure 4-38 on page 4-85).
10. Connect the wire connectors to the circuit board pan (F).
11. Secure the wires from the circuit board pan (F) with cable ties (G).
Summary of Contents for Advanta P1600
