Hill-Rom Advanta P1600, Service Manual

Page: 76 / 429

Function Checks
Chapter 2: Troubleshooting Procedures
Page 2 - 10 Advanta™ Bed Service Manual (man168ra)
Service Required LED
The Service Required LED (A) is located on the footboard control panel and
provides an alarm system to indicate that service is required (see figure 2-2 on
page 2-10).
Figure 2-2. LED Indicators Outside of the Footboard Control Panel Cover
The Service Required LED (A) flashes two different signals: a long flash and a
short flash. You can determine the area that requires servicing by noting the
different flashes (blinks). Observe the length of the LED flashes, and count the
number of times each flash occurs. To decode the service required signals,
refer to table 2-1 on page 2-11, table 2-2 on page 2-14, and compare the flashes
to those listed. The area that requires service, possible cause, and corrective
action is indicated.
m168_133