GRAUPNER mx-12 Hott, Programming Manual

Page: 194 / 200

194
Appendix
PRX (Power for Receiver)
Order No. 4136
A highly developed stabilised receiver power supply with intelligent
power management.
The unit constitutes a stabilised user-selectable power supply for the
receiver, and provides a further enhancement in the reliability of the
airborne power supply. It is designed for use with different types of
receiver battery, to ensure that it is straightforward and versatile in use.
When the model is operating, even brief collapses in battery voltage
are stored and displayed, offering the user the means of detecting a
receiver battery which is not “up to the job”, or failing.
For use with one or two receiver batteries (simultaneous discharge if •
two batteries are employed)
Suitable for five-cell or six-cell NiMH batteries, or two-cell LiPo or
•
LiFe packs. Graupner/JR , G3.5, G2 and BEC connector systems.
Three user-selectable receiver power voltage levels: 5.1 V / 5.5 V / •
5.9 V.
Two ultra-bright LEDs indicate the operational status of batteries 1
•
and 2 separately.
Integral high-quality On / Off switch.
•
Constructed to cope with high-current applications. •
Low-profile switch and LEDs to avoid spoiling the appearance and •
efficiency of the model.
Straight-through design of mounting lugs, LEDs and switch for sim-
•
ple installation using drilling template (supplied).
Appendix
Graupner|SJ HoTT Vario module
Order No. 33601
Vario with altitude signals and five different tones for climb and
descent; altitude display and storage of min. and max. altitude.
Additional warning thresholds for min. altitude, max. altitude, two- •
stage climb and descent rate
Variable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, constant
•
Variable warning repeat time: constant, 1, 2, 3, 4, 5 min, once •
The vario sensor can be connected directly to the receiver’s telem- •
etry input.
Specification
Altitude measurement: -500 m ... +3000 m •
Resolution: 0.1 m •
Sensitivity, vario: 0.5 m/3s, 1 m/3s, 0.5 m/s, 1 m/s, 3 m/s, program- •
mable per beep
Calculated average value: 4 - 20 measurements per measured
•
value, programmable
Graupner|SJ HoTT GPS / Vario module
Order No. 33600
Vario with altitude signals and five different tones for climb and
descent, plus GPS with range measurement, distance measurement,
speed indicator, display of flight direction and co-ordinates
Additional warning thresholds for min. altitude, max. altitude, two- •
stage climb and descent rate
Altitude display, storage of min. and max. altitude
•
Variable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, constant •
Variable warning repeat time: constant, 1, 2, 3, 4, 5 min, once •
The GPS / Vario sensor can be connected directly to the receiver’s •
telemetry input.
Specification, vario
Altitude measurement: -500 m ... +3000 m •
Resolution: 0.1 m •
Sensitivity, vario: 0.5 m/3s, 1 m/3s, 0.5 m/s, 1 m/s, 3 m/s, program- •
mable per beep
Calculated average value: 4 - 20 measurements per measured val-
•
ue, programmable