GRAUPNER mx-12 Hott, Programming Manual

Page: 61 / 200

61 Fixed-wing models: receiver assignment
Installation notes
The servos MUST be connected to the receiver
outputs in the following order:
Outputs not required are simply left vacant.
Please note the following points in particular:
If you are using only one aileron servo, receiver •
output 5 (right aileron) is left unused; it can also be
used for another purpose if you select “1 AIL” in the
“
Base settings
” menu.
If you are using only one flap servo, receiver output 7 •
(right flap) MUST be left unused, assuming that you
have selected “
2 FL
” in the “
Base settings
” menu.
Please also read the information on the following
pages.
Receiver socket assignment for models with up to two ailerons and two flaps, plus “normal” tail type, V-tail,
and two elevator servos (3 + 8)
S
er
vo
4
8
V
C
5
77
B
es
N
r
4
10
1
Receiver battery
Switch harness
Telemetry sensor
Y-lead,
Order No.
3936.11
Receiver
3 = Elevator / left V-tail
2 = Aileron / left aileron
8 = 2nd elevator / aux. function
7 = Right flap / reserve
5 = Right aileron / reserve
4 = Rudder / right V-tail
1 = Throttle / brake
6 = Flap / left flap / reserve