GRAUPNER mx-12 Hott, Programming Manual

Page: 134 / 200

134
Program description: basic settings
Use the arrow buttons of the left or right-hand touch-key
to leaf through to the “
basic settings
” menu point of the
multi-function menu:
mod. mem.
servo set.
D/R expo
wing mixer
base sett.
contr set.
phase trim
free mixer
servo disp basic sett
fail-safe telemetry
Touch the central SET button of the right-hand touch-key
to open the menu point:
Batt type
Batt warning
Touch Sense
Contrast
Ni-MH
Display light
RF Country
Voice volume
2
4.7V
0
Euro
3
unlim
Beep volume 3
In this menu you can enter basic settings which are
specific to the transmitter.
Note:
Settings in this menu only need to be entered once, and
apply to the whole transmitter. This means that the last
valid settings always appear when you call up this menu
from another model memory.
Use the arrow buttons  of the left or right-hand
touch-key to select the appropriate line, then touch the
central
SET button of the right-hand touch-key. The
value field is now highlighted (black background), and
you can use the arrow buttons of the right-hand touch-
key to alter the default value. Pressing the central
SET
button once more concludes the entry process.
Battery type
Batt type
Batt warning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light unlim
In this line you inform the transmitter whether its power
is to be drawn from a four-cell NiMH battery or a single-
cell LiPo battery. The voltage range offered in the (next)
line “Battery warning threshold” will vary according to
this setting.
Simultaneously pressing the arrow buttons
 or 
of the right-hand touch-key ( CLEAR ) resets the value in
the highlighted field to NiMH.
Battery warning threshold
Batt type
Batt warning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light unlim
In this line you can enter any voltage you like …
battery
needs
charging
… within the range 4.5 to 5.5 V (NiMH battery) or 3.4 to
4.2 V (LiPo battery) - according to your choice of bat-
tery type - in increments of 0.1 Volt. However, never be
tempted to enter too low a value here, to ensure that you
always have ample time to land your model safely if a
battery warning should be triggered.
Simultaneously pressing the arrow buttons
 or 
of the right-hand touch-key ( CLEAR ) resets the value in
the highlighted field to 4.7 V or 3.4 V respectively.
Touch sensitivity
Batt type
Batt warning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light unlim
In this line you can select the touch sensitivity of the
touch-keys within the range 1 to 10.
Simultaneously pressing the arrow buttons
 or 
of the right-hand touch-key ( CLEAR ) resets the value in
the highlighted field to “2”.
Contrast
You can adjust the contrast of the
mx-16
HoTT’s in-
tegral screen to optimise its legibility in varying weather
and temperatures:
#01
3:33h
stop
flt
0:00
0:00
5.5V
5.2V HoTT
M
Basic settings