GRAUPNER mx-12 Hott, Programming Manual

Page: 74 / 200

74 Program description: base settings - fixed-wing model
Base settings
Basic model-specific settings for fixed-wing model aircraft
Before you start programming specific parameters,
some basic settings must be entered which apply only
to the currently active model memory. Select the “
Base
settings
” (basic model settings) menu using the arrow
buttons of the left or right-hand touch-key, then touch the
central
SET
button of the right-hand touch-key:
mod.mem.
servo set.
D/R expo
wing mixer
base sett.
contr set.
phase trim
free mixer
servo disp basic sett
fail-safe telemetry
model name
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type normal
Touch the SET button of the right-hand touch-key to
move to the next screen page, where you can select
characters to assemble the model name. You can enter
up to nine characters to define a model name:
0123456789
PQRSTUVWXYZ
model name
?
: ;
A B CDEFGHIJKLMNO
GRAU B
Use the arrow buttons of the left-hand touch-key to
select the desired character, then move to the next posi-
tion in the name by pressing the arrow button  of the
right-hand touch-key, or its central
SET
button, where
you can select the next character.
Simultaneously pressing the
 or  buttons of the
right-hand touch-key ( CLEAR ) inserts a space at that
point.
You can move to any character position within the input
field using the
 buttons of the right-hand touch-key.
Touching the central ESC button of the left-hand touch-
key returns you to the previous menu page.
The model name entered in this way appears in the
basic display, and also in the sub-menus of the “
Model
memory ” menu.
stick mode
“
MODE 2
” (Throttle at left stick)
“MODE 3” (Throttle at right stick) “MODE 4” (Throttle at left stick)
“MODE 1”
(Throttle at right stick)
elev. down
elev. up
left r
udder
right r
udder
full throttle
idle
left aileron
right aileron
full throttle
left r
udder
right r
udder
idle
elev. down
elev. up
left aileron
right aileron
elev. down
elev. up
left aileron
right aileron
Motor Vollgas
idle
left r
udder
right r
udder
full throttle
idle
left aileron
right aileron
elev. down
elev. up
left r
udder
right r
udder
Basically there are four possible ways of arranging the
principal control functions of a fixed-wing model on the
two dual-axis sticks: the primary functions are aileron,
elevator, rudder and throttle (or airbrakes). Which of
these options you select depends on your individual
preferences and flying style.
Use the arrow buttons
 of the left or right-hand
touch-key to move to the “
Stick mode
” line. You will see
the select field framed:
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type normal
GRAUBELE
Briefly press the SET button to highlight the current stick
mode (black background). Now use the arrow buttons
of the right-hand touch-key to select one of the options
1 to 4.
Simultaneously pressing the
 buttons or the 
buttons of the right-hand touch-key ( CLEAR ) returns the
display to stick mode “1”.
Touching the
SET
button again disables the select field
once more, so that you can switch lines.
motor at C1
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type normal
GRAUBELE
When you select “motor at C1” using the arrow buttons

of the left or right-hand touch-key, you will see the
corresponding input field framed. Touch the central SET
button of the right-hand touch-key to highlight the cur-
rent setting. Now use the arrow buttons of the right-hand
touch-key to switch between the four possible options: