GRAUPNER mx-12 Hott, Programming Manual

Page: 196 / 200

196
Appendix
Graupner|SJ HoTT Smart-Box
Order No.
33700
A vast range of different functions combined in a single device: that’s
what destines the SMART-BOX to be your intelligent companion in
future. Whether you want to display telemetry data in real time, or
enter changes to your HoTT system, the large-area screen with 8 x 21
characters makes the task simple. The flexible Smart-Box includes an
integral buzzer for generating audible signals and warnings for even
greater flexibility and practicality.
The installation set supplied makes it easy to mount the unit on the
support bars of hand-held transmitters, allowing you to position it in
such a way that you can read off telemetry data in real time while you
control your model.
The user-update facility ensures that the SMART-BOX is always up-to-
date, and provides a route for expanded functions in future.
Transmitter voltage display with •
user-variable warning threshold
Country setting •
Range check • Signal quality •
Receiver temperature • Receiver voltage •
Servo reverse • Servo neutral position •
Servo travel • Cycle time •
Channel swap • Fail-Safe settings •
Mixer settings • Servo test •
Dimensions: approx. 76 mm x 72 mm x 17 mm (L x W x H)
Weight: approx. 55g
Graupner|SJ HoTT magnetic rev-count sensor
Order No.
33616
For connection to the General-Engine module (Order No. 33610 ),
General-Air module (Order No.
33611
) or Electric-Air module (Order
No. 33620 ).
The number of blades must be selected beforehand in the module’s
Telemetry menu.
Graupner|SJ HoTT optical rev-count sensor
Order No.
33615
For connection to the General-Engine (Order No. 33610 ), General-Air
(Order No.
33611
) or Electric-Air module (Order No.
33620
).
The number of blades must be selected beforehand in the module’s
Telemetry menu.
Graupner|SJ HoTT USB interface
Order No.
7168.6
This USB interface is required in conjunction with the adapter lead,
Order No.
7168.6A
(available separately) for updating receivers and
sensors. The
mx-16
HoTT transmitter can be updated directly using
the USB lead included in the interface set.
Graupner|SJ HoTT adapter lead
Order No. 7168.6A
This adapter lead is required in conjunction with the USB interface,
Order No. 7168.6 (available separately) for updating receivers and
sensors. The mx-16 HoTT transmitter can be updated directly using
the USB lead included in the interface set.