GE Vivid S70, User Manual

Page: 112 / 709

Prepare the System for Use
3-48
Vivid S70 / S60
–
User Manual
BC092760-1EN 01
Moving and transporting the system
Wheels
The front wheels and the right rear wheel of the system are
controlled by gray brake pedals situated above each wheel.
The left rear wheel is controlled by a green directional-lock pedal
above the wheel.
The rear and front wheels of the system are free-swivel wheels
(Figure 3-5)
Examine the wheels frequently for defects to avoid breaking or
jamming.
Moving the system
To prepare the system to be moved
1. Turn system Off to Full shut-down or
Standby
mode.
2. Remove the AC plug from the power outlet.
3. Wrap the AC power cord to ensure cord is not hanging in the
wheel area or beyond the sides of the system.
4. Pull the left handle and swivel the keyboard so it will lock in
its central position (‘Main display adjustment’ on
page 3-44
).
5. Disconnect all external cables linking the system to any
off-board peripheral devices and network. (Note the marks
on each cable to reconnect them later).
6. Place all probes securely in proper probe holders. Ensure
that the probe cables do not protrude from the side of the
system or interfere with the wheels, or foot area. Hang the
cords on respective hooks provided, ensuring cords are
secure and out of lower portion of the system and do not
extend beyond the sides of system.
7. Ensure that no loose items are left on the system.
8. If intending to travel over bumpy surface or if more visibility
is required during transportation, fold the main display
forward to a horizontal position (‘Main display adjustment’
on
page 3-44
).