GE Vivid S70, User Manual

Page: 510 / 709

Report
11-36
Vivid S70 / S60
–
User Manual
BC092760-1EN 01
Figure 11-21. The Measurements box
4. Enter a heading (e.g. 2D).
5. Using the
Filter criteria
, define the type of measurements to
be displayed (e.g. Cardiac, 2D, measured and calculated).
Select
Show normal value to display user-defined Normal
value next to the measurements in the Report (see ‘Normal
values’ on
page 12-38
for more information).
NOTE: References for the normal values can be displayed in the
report by checking Normal value references from Insert ->
Archive Info (see page 11-34).
The
Measurement
list on the left side is updated.
6. From the measurement list, select the measurement to
insert and press Add . Both single measurements or a folder
may be added.
7. The list of the inserted measurements is displayed in the
Selected measurement
list on the right side.
8. Press OK .
9. Select the next table cell and repeat steps 3 to 8 to insert
several measurements.
Inserting Text fields
Text fields are:
• Containers for Referral reasons, Comments and Diagnosis
information.
• Containers for free text, where the user can type information
in the report.