GE Vivid S70, User Manual

Page: 454 / 709

Archiving
10-52
Vivid S70 / S60
–
User Manual
BC092760-1EN 01
Running the Disk management function
The Disk management function can be run at any time. In
addition, the user may be prompted to run Disk management if
the time since the last Disk management operation performed
has reached the setting for the Reminder interval (see
page 10-50), or if the local hard drive is about to be full.
Disk management can be run from the
Archive
screen (see
below) or from Config / Connectivity / Disk management
(Figure 10-29
on page 10-50
).
Manual start of Disk management
1. Press Patient .
The
Archive
screen is displayed.
2. Press Disk management .
The
Disk management
window is displayed (Figure 10-30).
Figure 10-30. The Disk management window
The Disk management operation will either copy, remove or
delete files from the local archives depending on the Disk
management configuration (see page 10-49). Make sure the
correct configuration is set.
Prepare the destination device(s). If a connected USB
device is used, make sure the correct device is selected.
If using CD/DVD, the operation may require several disks as
specified in the
Disk management
window. Make sure that
the specified number of disks are available.
NOTE: CD/DVD do not need to be formatted.