GE Vivid S70, User Manual

Page: 572 / 709

Customize Configuration
12-52
Vivid S70 / S60
–
User Manual
BC092760-1EN 01
NOTE: Only jobs that failed or are in hold can be resent.
2. Press Resend .
To send a job to a new destination:
This is typically used if the configuration of the server is
changed.
1. Select the job(s) to send in the
DICOM job spooler
window.
NOTE: Only jobs that failed or are in hold can be sent to a new
destination.
2. Press Send to... .
A dialogue window is displayed.
3. Select the new destination from the
Destination
pull-down
menu.
4. Press Send .
To hold a job:
1. Select the job(s) to hold in the
DICOM job spooler
window.
NOTE: Only inactive jobs can be set on hold.
2. Press Hold .
3. To undo hold, press Resend .
DICOM images
To configure DICOM images:
1. Press Utility / Config on the Touch panel and log on as
administrator.
2. Select the Connectivity category and DICOM subgroup.
The
DICOM
sheet is displayed.
Figure 12-36. The DICOM sheet