GE Multilin G650, Manual

Page: 81 / 639

4-6 G650 Generator Protection & Control System GEK-113285A
4.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 4 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
4
4.1.5 FILE MANAGEMENT
File management with EnerVista 650 Setup software:
4.1.5.1 OFF LINE MODE
Figure 4–3: OFF-LINE MODE FILE MANAGEMENT
Run EnerVista 650 Setup
Open a *.650 file
(“ File>Open ” menu)
Modify protection Settings
and relay configuration
Is it necessary to
program
additional logic?
Launch the Logic Configuration tool in EnerVista
650 Setup (“ Setpoint>Logic Configuration ”)
Create new or modify the existing logic:
(“ File>Open Project ”)
Compile and save logic file (*.pep) and drawing
design (*.aut) in Logic Configuration tool
Exit PLC Graphic Editor and save the *.650 file
from the main application menu
Is the relay
completely
configured?
Save *.650 settings & configuration file
Store in the computer the Logic configuration files (*.pep, *.aut, *.lib) as
well as the *.650 for further logic changes.
YES
YES
NO NO