manualshive.com logo in svg

FUTABA 01000141, Full Manual

FUTABA 01000141 is a revolutionary product designed for convenience and efficiency. With its full manual available for download, users can easily access the comprehensive instructions they need to make the most out of their purchase. This manual can be downloaded for free from manualshive.com, ensuring hassle-free and user-friendly experience.

Share
Download
background image

119

The dedicated mixes, etc. usable when airplane 

or glider model type is selected are displayed 

in this Model menu functions section. First use 

the Model type function of the Linkage menu to 

preset the model type, wing type, and tail type 

matched to the fuselage used. Other settings reset 

the data used in mixing function, etc.

These dedicated mixes can be set for each 

flight condition, as required. When you want to 

use the system by switching the settings for each 

condition by switch or stick position, use the 

Condition select function to add flight conditions. 

(Up to 8 conditions can be used)

Note: The T16IZ is designed so that the airplane and 

glider model types can handle aircraft of the same 

wing type.

The functions common to airplanes and gliders, 

except some dedicated functions, are summarized 

without regard to the model type.

The setting items are different, depending on the 

number of servos, etc. according to the wing type 

used. The setup screens in the instruction manual 

are typical examples.

MODEL MENU (Airplane/Glider functions)

Model menu (Airplane/Glider) functions table

Servo monitor

Displays the servo test and operation position

Condition select

Flight conditions addition, deletion, copy, condition renaming, and condition 

delay can be set. 

AFR

Sets the angle and curve of all the operation functions. 

Dual rate

D/R curve which can be switched with a switch, etc. can also be added.

Program. mixes

Program mixing which can be freely customized. Up to 10 mixes can be used for 

each condition.

Aileron differential

This function adjusts the left and right ailerons. Roll axis correction and fine 

tuning with a VR are also possible. This is convenient when making settings 

during flight.

[Airplane/glider, 2 ailerons or more]

Flap setting

The flaps can be adjusted independently. For a 4 flaps model, the camber flaps 

can be mixed with the brake flaps. 

[Airplane/glider, 2 flaps or more]

AIL → Camber flap

This mix operates the camber flaps in the aileron mode. It improves the 

operation characteristic of the roll axis. 

[Airplane/glider, 2 ai 2 flaps or more]

AIL → Brake flap

This mix operates the brake flaps in the aileron mode. It improves the operation 

characteristic of the roll axis. 

[Airplane/glider, 4 flaps or more]

Aileron → Rudder

This mix is used when you want to operate the rudder at aileron operation. 

Banking at a shallow bank angle is possible. 

[Airplane/glider, general]

Elevator → Camber

This mix is used when you want to the mix camber flaps with elevator operation. 

Lifting force can be increased at elevators up. 

[Airplane/glider, 2 ailerons or more]

Camber mixing

This mix adjusts the camber and corrects the elevators.

[Airplane/glider, 2 ailerons or more]

Airbrake → ELE

This mix is used to correct operation of the airbrakes (spoilers) when landing. 

[Airplane/glider, general]

Camber flap → ELE

This mix is used to correct for attitude changes when the camber flaps are being 

used. 

[Airplane/glider, 2 ai 1 flap or more]

Rudder → Aileron

This function is used to correct roll knife edge, etc. of stunt planes. 

[Airplane/glider, general]

Rudder → Elevator

This function is used to correct roll maneuvers, knife edge, etc. of stunt planes.

[Airplane, general]

Butterfly (Crow)

This function is used when powerful brake operation is necessary. 

[Glider, 2 ailerons or more]

Trim mix 1/2

The ailerons, elevators, and flaps trim offset rate can be called by switch or 

condition selection. 

[Glider general]

Snap roll

This function selects the snap roll switch and adjusts the steering angle of each 

rudder. Servo speed can also be adjusted. 

[Airplane general]

Air brake

This function is used when airbrakes are necessary when landing or when diving, 

etc. during flight. 

[Airplane, general]

Gyro

This is a dedicated mix when a GYA Series gyro is used. 

[Airplane/glider/multicopter, general]

Ailevator

This function adjusts the elevators and ailerons of models with elevator 

specifications. 

[Airplane/glider, elevator specifications]

Acceleration

Allows a brief "overload" in response to sudden Elevator, Elevator → Camber, 

and Ail → Rudder. 

[Airplane/glider general]

Motor

The operation speed when the motor of F5B and other EP gliders is started by 

switch can be set.

[Airplane/glider, general]

V-Tail

This function adjusts the elevators and rudder of V-tail models. 

[Airplane/glider, V-tail specifications]

Winglet

This function adjusts the left and right rudders of winglet models. 

[Airplane/glider, winglet specifications]

Summary of Contents for 01000141


































































































































































































































Reviews:

No comments

Related manuals for 01000141

Nelson 800 Series Application Manual preview
800 Series
Brand: Nelson Pages: 19
C-TEC 800 Series Installation Instructions preview
800 Series
Brand: C-TEC Pages: 2
Parasound 7100 Owner'S Manual preview
7100
Brand: Parasound Pages: 72
Jafar 7010 Operation And Maintenance Manual preview
7010
Brand: Jafar Pages: 15
S-COM 7K Manual preview
7K
Brand: S-COM Pages: 400
JDS Uniphase SK Series User Manual preview
SK Series
Brand: JDS Uniphase Pages: 27
Danfoss EH Series Service Manual preview
EH Series
Brand: Danfoss Pages: 20
OEG KMS Manual preview
KMS
Brand: OEG Pages: 168
Accel 300+ Installation Instructions Manual preview
300+
Brand: Accel Pages: 8
Samson 3372 User Manual preview
3372
Brand: Samson Pages: 8
Samson 3249 Mounting And Operating Instructions preview
3249
Brand: Samson Pages: 60
Samson 2405 Series Mounting And Operating Instruction preview
2405 Series
Brand: Samson Pages: 40
Samson TROVIS 3730-1 Installation Instructions Manual preview
TROVIS 3730-1
Brand: Samson Pages: 6
IBA MS8xICP Manual preview
MS8xICP
Brand: IBA Pages: 29
Mitsubishi AL-ASI-BD Hardware Manual preview
AL-ASI-BD
Brand: Mitsubishi Pages: 16
SOMFY Situo 1 RTS Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 4
Hiwin RC4 Original Instruction preview
RC4
Brand: Hiwin Pages: 99
A.R.I. K-060VB M1 Installation Operation & Maintenance preview
K-060VB M1
Brand: A.R.I. Pages: 14

Brands by name

Popular brands

Load more brands