FUTABA 01000141 Full Manual Download Page 4

Page: 4 / 225

Thank you for purchasing a Futaba

FASSTest-2.4 GHz

T16IZ series digital proportional R/C system. This system is

extremely versatile and may be used by beginners and pros alike. In order for you to make the best use of your system

and to fly safely, please read this manual carefully. If you have any difficulties while using your system, please consult

the manual, our online Frequently Asked Questions (on the web pages referenced below), your hobby dealer, or the

Futaba Service Center.

*FASSTest: Futaba Advanced Spread Spectrum Technology extend system telemetry

Due to unforeseen changes in production procedures, the information contained in this manual is subject to change

without notice.
Support and Service: It is recommended to have your Futaba equipment serviced annually during your hobby’s “off

season” to ensure safe operation.

In North America

Please feel free to contact the Futaba Service Center for assistance in operation, use and programming. Please be

sure to regularly visit the T16IZ Frequently Asked Questions web site at www.futabausa.com/. This page includes

extensive programming, use, set up and safety information on the T16IZ radio system and is updated regularly. Any

technical updates and US manual corrections will be available on this web page. If you do not find the answers to your

questions there, please see the end of our F.A.Q. area for information on contacting us via email for the most rapid and

convenient response.

Don’t have Internet access? Internet access is available at no charge at most public libraries, schools, and other public

resources. We find internet support to be a fabulous reference for many modelers as items can be printed and saved for

future reference, and can be accessed at any hour of the day, night, weekend or holiday. If you do not wish to access

the internet for information, however, don’t worry. Our support teams are available Monday through Friday 8-5 Central

time to assist you.

For Service :

FUTABA Corporation of America

2681 Wall Triana Hwy Huntsville, AL 35824, U.S.A.

Phone:1-256-461-9399 FAX:1-256-461-1059

https://www.futabausa.com/

E-mail: [email protected]

Outside North America

Please contact your Futaba importer in your region of the world to assist you with any questions, problems or service

needs. Please recognize that all information in this manual, and all support availability, is based upon the systems

sold in North America only. Products purchased elsewhere may vary. Always contact your region’s support center for

assistance.

INTRODUCTION

Application, Export, and Modification

1. This product may be used for unmanned aerial vehicle use. It is not intended for use in any application other than

unmanned aerial vehicle control. The product is subject to regulations of the Ministry of Radio/Telecommunications

and is restricted under Japanese law to such purposes.

2. Exportation precautions:

(a) When this product is exported from the country of manufacture, its use is to be approved by the laws governing

the country of destination which govern devices that emit radio frequencies. If this product is then re-exported to other

countries, it may be subject to restrictions on such export. Prior approval of the appropriate government authorities may

be required. If you have purchased this product from an exporter outside your country, and not the authorized Futaba

distributor in your country, please contact the seller immediately to determine if such export regulations have been met.

(b) Use of this product with anything other than models may be restricted by Export and Trade Control Regulations,

and an application for export approval must be submitted. This equipment must not be utilized to operate equipment

other than radio controlled models.

3. Modification, adjustment, and replacement of parts: Futaba is not responsible for unauthorized modification,

adjustment, and replacement of parts on this product. Any such changes may void the warranty.

“Please visit www.futabausa.com to create and submit a service

ticket for warranty, repair, or check up work.”

Summary of Contents for 01000141


































































































































































































































Search results

Summary of Contents for 01000141

Reviews:

Related manuals for 01000141

Brands by name

Popular brands

FUTABA 01000141, Full Manual

Search results

Summary of Contents for 01000141

Reviews:

Related manuals for 01000141

Brands by name

Popular brands