manualshive.com logo in svg

FUTABA 01000141, Full Manual

FUTABA 01000141 is a revolutionary product designed for convenience and efficiency. With its full manual available for download, users can easily access the comprehensive instructions they need to make the most out of their purchase. This manual can be downloaded for free from manualshive.com, ensuring hassle-free and user-friendly experience.

Share
Download
background image

207

Setting methods

●Group/single mode selection

   Activating functions for only the selected 

conditions:

1. Tap the [Gr] button and switch to the [Sngl ] 

mode.

*Each time the button is tapped, it toggles between the Gr 

and Sngl modes.

●Mixing mode selection

    Using the offset mode:
1. Tap the Mode button and switch to the 

Offset mode.

*Each time the button is tapped, it toggles between the 

Mixing and Offset modes.

●Mixing setup screen selection

1. Tap the button of the mixing you want to 

set. The mixing setup screen is displayed. 

Activate the function.

2. Activate the function by tapping the [INH] 

button.

*Each time this button is tapped, it toggles between [INH] 

and [ON/OFF].

●Mixing ON/OFF switch setting and ON/OFF 

direction switching

*An ON/OFF switch is not set even when the function is 

activated.

1. When you want to turn mixing ON/OFF by 

switch, tap the [--] button to call the <Switch> 

screen and then select the switch and its ON 

direction.

*For a description of the selection method, see [Switch 

setting method] at the back of this manual.

●Master channel setting (except offset type 

mixing)

1. Tap the Master button to call the Function 

menu and select the master channel.

2. To link this mixing with other mixing, tap the 

"Link" button.

*Each time the button is tapped, it toggles between mixing 

dir and - and "OFF" (no link).

*Master channel control can be set to stick, VR, and other 

simple travels which do not include End point, AFR, D/R, 

mixing setting, etc. In this case, display the <Function,H/

W> screen by tapping the [Stick, Switch, Dial] button and 

then select master channel side control.

●Slave channel setting

1. Tap the Slave button to call the Function 

menu and select the slave channel.

2. To link this mixing with other mixing, tap the 

"Link" button.

*Each time the button is pressed, it toggles between mixing 

dir and - and "OFF" (no link).

●Trim mode ON/OFF setting

1. To turn the trim mode ON/OFF, tap the Trim 

button on the screen.

*When mixing includes master side trim, set the Trim button 

to [ON]. When mixing does not include master side trim, set 

the Trim button to [OFF].

*Each time this button is pressed, it toggles between [ON] 

and [OFF].

*This is effective when the master channel is set by Function.

●Mixing curve type selection

1. Tap the curve type selection button of the 

curve type you want to use to display the 

selection screen. Then, select the curve you 

want to use.

*For a description of the curve setting method, see the 

description at the back of this manual.

●Fine tuning trim setting

1. When using the curve fine tuning function, 

tap the [--] button of the Fine Tuning item to 

call the <Switch> screen and then select the 

lever, VR, etc. you want to use.

*For a description of the fine tuning trim setting method, see 

the description at the back of this manual.

●Servo speed setting

1. When setting the servo speed, tap the speed 

button. The Servo speed setup screen is 

displayed.

*For a description of the servo speed setting method, see the 

description at the back of this manual.

*Offset mixing changes the speed. Use the Speed In and 

Speed Out buttons to readjust the speed.

  The mixing switch can set a delay with a different rate at 

starting and stopping.

*This function is inactive when a mixing switch is not set.

Summary of Contents for 01000141


































































































































































































































Reviews:

No comments

Related manuals for 01000141

ABB 615 Series ANSI Manual preview
615 Series ANSI
Brand: ABB Pages: 60
Y-Solar Smart-MPPT Li Series User Manual preview
Smart-MPPT Li Series
Brand: Y-Solar Pages: 6
2gig Technologies GC3 Manual preview
GC3
Brand: 2gig Technologies Pages: 4
2gig Technologies GC3 Quick Start Manual preview
GC3
Brand: 2gig Technologies Pages: 2
G1SLE MK2 Alignment Manual preview
MK2
Brand: G1SLE Pages: 2
KAR-TECH MICRO Installation And Operation Manual preview
MICRO
Brand: KAR-TECH Pages: 28
2iB SC10 Quick Start Manual preview
SC10
Brand: 2iB Pages: 5
2gig Technologies Go!Control Panel Installation & Programming Manual preview
Go!Control Panel
Brand: 2gig Technologies Pages: 78
Quectel BG96 At Command Manual preview
BG96
Brand: Quectel Pages: 23
Quectel BG96 Hardware Design preview
BG96
Brand: Quectel Pages: 79
Rabbit RCM2000 Getting Started Manual preview
RCM2000
Brand: Rabbit Pages: 38
Samson 3372 User Manual preview
3372
Brand: Samson Pages: 8
Samson 3249 Mounting And Operating Instructions preview
3249
Brand: Samson Pages: 60
Samson 2405 Series Mounting And Operating Instruction preview
2405 Series
Brand: Samson Pages: 40
Vacon 100 INDUSTRIAL Additional Installation Instruction preview
100 INDUSTRIAL
Brand: Vacon Pages: 6
Vacon 100 INDUSTRIAL Technical Manual preview
100 INDUSTRIAL
Brand: Vacon Pages: 24
Vacon 100X series Marine Installation Manual preview
100X series
Brand: Vacon Pages: 30
Vacon 100 flow User Manual preview
100 flow
Brand: Vacon Pages: 81

Brands by name

Popular brands

Load more brands