10-20
MHT258a (Engl.)
(
λ
) Motor power for motor with providing brake
Connector kit type : WSK-M06P-CB ( 6-pin)
Application : GYS type motor 1 [kW] and above
Connector
MS3108B24 - 10S
Cable clamp
MS3057 - 16A
Mass : 200 [g]
(m) Control power input
Connector kit type : WSK-LO2P
Application : 0.75[kW] and below
Connector
231702/026 - 000
Manual lever
231 - 131
Mass : 4 [g]
(n) Battery
Connector kit type : WSB - S
Battery
ER1733WK41 1PP
・
Nominal voltage : 3.6 [V]
・
Capacity : 1500 [mAh]
Refer to 6.3.
Storage of battery
If a battery has been out of service for long-term, the following procedures should be followed.
Battery should be stored in the storeroom. The storeroom should be well ventilated, and selected for possible protection against temperature and moisture.
Surrounding condition should be kept within
−
10 to + 75 [
℃
] temperature and 10 to 90[%]RH humidity.
Storage term should be within two years.
Notch position
Rubber bush
42.9
4.8
79.6
90
43.7
26.3
14.5
50
±
5
36
16.5
±
0.5
ER17/33(2/3A)
3.6V
Summary of Contents for Faldic-a Series
