Security Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
964
configure radius-accounting server
configure radius-accounting {mgmt-access | netlogin} [primary | secondary]
server [<ipaddress> | <hostname>] {<tcp_port>} client-ip [<ipaddress>] {vr
<vr_name>}
Description
Configures the RADIUS accounting server.
Syntax Description
Default
The following lists the default behavior of this command:
●
The UDP port setting is 1813
●
The virtual router used is VR-Mgmt, the management virtual router
●
Switch management and network login use the same RADIUS accounting server.
Usage Guidelines
NOTE
The BlackDiamond 8800 series switch and the Summit X450 family of switches do not support user-created VRs.
Use this command to specify the radius accounting server.
The accounting server and the RADIUS authentication server can be the same.
Use of the
<hostname>
parameter requires that DNS be enabled.
Beginning with ExtremeWare XOS 11.2, you can specify one pair of RADIUS accounting servers for
switch management and another pair for network login. To specify RADIUS accounting servers for
mgmt-access
Specifies the RADIUS accounting server for switch management.
netlogin
Specifies the RADIUS accounting server for network login.
primary
Configure the primary RADIUS accounting server.
secondary
Configure the secondary RADIUS accounting server.
ipaddress
The IP address of the accounting server being configured.
hostname
The host name of the accounting server being configured.
tcp_port
The UDP port to use to contact the RADIUS accounting server.
ipaddress
The IP address used by the switch to identify itself when communicating with
the RADIUS accounting server.
vr_name
Specifies the virtual router on which the client IP is located.
NOTE: The BlackDiamond 8800 series switch and the Summit X450 family of
switches do not support user-created VRs.
