Commands for Status Monitoring and Statistics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
560
clear elsm ports auto-restart
clear elsm ports <portlist> auto-restart
Description
Clears one or more ELSM-enabled ports that are in the Down-Stuck state.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not have automatic restart enabled, use this command to transition ELSM-enabled ports that
are permanently in the Down-Stuck state to the Down state. You can also use the
enable elsm ports
<portlist> auto-restart
command to transition a port from the Down-Stuck state to the Down state.
For information about the ELSM-enabled ports states, see the command
show elsm ports
on page 661
.
If automatic restart is enabled (this is the default behavior), automatic restart automatically transitions
the ports from the Down-Stuck state to the Down state. For more information, see the command
enable
elsm ports auto-restart
on page 643
.
Example
The following command transitions the ports from the Down-Stuck state to the Down state:
clear elsm ports 2:1-2:2 auto-restart
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
portlist
Specifies the ELSM-enabled ports that are permanently in the Down-Stuck
state.
