show vlan
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
781
show vlan
show vlan {detail {ipv4 | ipv6} |<vlan_name> {ipv4 | ipv6} | virtual-router
<vr-router> | <vlan_name> stpd}
Description
Displays information about VLANs.
Syntax Description
Default
Summary information for all VLANs on the device.
Usage Guidelines
NOTE
To display IPv6 information, you must issue either the
show vlan detail
command or
show vlan
command
with the name of the specified VLAN.
Unlike many other VLAN-related commands, the keyword “vlan” is required in all forms of this
command except when requesting information for a specific vlan.
Use the command
show vlan
to display summary information for all VLANs. It shows various
configuration options as a series of “flags” (see the example below). VLAN and protocol names may be
abbreviated in this display.
Use the command
show vlan detail
to display detailed information for all VLANs. This displays the
same information as for an individual VLAN, but shows every VLAN, one-by-one. After each VLAN
display you can elect to continue or quit.
Protocol
none
indicates that this VLAN was configured with a user-defined protocol that has
subsequently been deleted.
detail
Specifies that detailed information should be displayed for each VLAN.
vlan_name
Specifies a VLAN name.
ipv4
Specifies IPv4.
ipv6
Specifies IPv6.
vr-name
Specifies a virtual router name.
NOTE: This variable is available only on the BlackDiamond 10808 and 12804
switch.
stpd
Specifies that STP domains displays for each VLAN.
