show diagnostics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1979
If you try to display diagnostic test information on a slot where no module is installed, the switch
displays messages similar to the following:
No card in slot 3
Or
No card in slot
Running Diagnostics.
To run diagnostics on an I/O module or an MSM installed in the BlackDiamond
10808 switch or the BlackDiamond 8800 series switch, use the following command:
run diagnostics
[extended | normal] {slot [<slot> | A | B]}
To run diagnostics on all of the installed I/O modules and the primary MSM installed in the
BlackDiamond 12804 switch, use the following command:
run diagnostics
[extended | normal]
To run diagnostics on the Summit X450 family of switches, use the following command:
run diagnostics
[extended | normal | stack-port]
Depending on the software version running on your switch or your switch model, additional or
different diagnostic information might be displayed. For more information, see the command
run
diagnostics
on page 1967
.
Example
The following command displays the results of module diagnostics for the I/O module in slot 2:
show diagnostics slot 2
The following is sample output from the BlackDiamond 10808 switch:
I/O SLOT
Slotnum 2
DiagResult timestamp Tue Jun 28 10:26:00 2005
Test Temperature = 29 degrees C
Diag Test Version=1.0.6.2. S/N=0405F-00063
------------------------------------------------------------------------
CPU System | Passed
------------------------------------------------------------------------
Register Test | Passed
------------------------------------------------------------------------
Memory Test | Passed
------------------------------------------------------------------------
System Test | Passed
------------------------------------------------------------------------
Summary: Diagnostics Pass
The following is sample output from the BlackDiamond 8800 series switch:
Summary: Diagnostics Pass
