configure sharing lacp defaulted-state-action
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
333
configure sharing lacp defaulted-state-action
configure sharing <port> lacp defaulted-state-action [add | delete]
Description
Configures whether a defaulted LAG port is removed from the aggregator.
Syntax Description
Default
Delete.
Usage Guidelines
You must enable sharing and create the LAG prior to configuring this LACP parameter.
You can configure whether you want a defaulted LAG port removed from the aggregator or added back
into the aggregator. If you configure the LAG to remove ports that move into the default state, those
ports are removed from the aggregator and the port state is set to unselected.
NOTE
In ExtremeWare XOS version 11.3, defaulted ports in the LAG are always removed from the aggregator; this is not
configurable.
If you configure the LAG to add the defaulted port into the aggregator, the system takes inventory of
the number of ports currently in the aggregator:
●
If there are fewer ports in the aggregator than the maximum number allowed, the system adds the
defaulted port to the aggregator (port set to selected and collecting-distributing).
●
If the aggregator has the maximum ports, the system adds the defaulted port to the standby list
(port set to standby).
NOTE
If the defaulted port is assigned to standby, that port automatically has a lower priority than any other port in the
LAG (including those already in standby).
To verify the LACP default action, use the
show lacp lag <group-id> detail
command.
port
Specifies the master logical port for the LAG you are setting the default action
for.
add
Enter this value to have the switch add defaulted ports to the aggregator for
this LAG.
delete
Enter this value to have the switch delete defaulted ports from the aggregator
for this LAG.
