Power Over Ethernet Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
538
show inline-power info ports
show inline-power info {detail} ports <port_list>
Description
Displays inline power information for the specified ports.
Syntax Description
Default
N/A.
Usage Guidelines
NOTE
Ports in the
denied
or
faulted
state periodically display the
searching
state as the hardware retests the PD
state.
You can use this command to generate a summary report or a detailed report.
Summary output displays the following inline power information for the specified ports:
●
State—Displays the port power state:
■
Disabled
■
Searching
■
Delivering
■
Faulted
■
Disconnected
■
Other
■
Denied
●
PD’s power class—Displays the class type of the connected PD:
■
“-----”: disabled or searching
■
“class0”: class 0 device
■
“class1”: class 1 device
■
“class2”: class 2 device
■
“class3”: class 3 device
■
“class4”: class 4 device
●
Volts—Displays the measured voltage. A value from 0 to 2 is valid for ports that are in a searching
state.
port_list
Specifies one or more ports.
