show iparp
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1399
show iparp
show iparp {<ip_addr> | <mac> | vlan <vlan_name> | permanent} {vr
<vr_name>}
Description
Displays the IP Address Resolution Protocol (ARP) table. You can filter the display by IP address, MAC
address, VLAN, or permanent entries.
Syntax Description
Default
Show all entries, except for proxy entries.
Usage Guidelines
Displays the IP ARP table, including:
●
IP address
●
MAC address
●
Aging timer value
●
VLAN name, VLAN ID and port number
●
Flags
If you do not specify a virtual router, the command applies to the current virtual router.
The show output displays the following information:
ip_addr
Specifies an IP address.
mac
Specifies a MAC address.
vlan_name
Specifies a VLAN name.
permanent
Specifies permanent entries.
vr_name
Specifies a virtual router.
Dynamic entries
The number of dynamic (learned ARP) entries in the table.
Static entries
The number of configured (static ARP) entries in the table.
Pending entries
The number of sent ARP requests that have not yet received a response.
In Request
The number of ARP request packets received (by this virtual router).
In Response
The number of ARP reply packets received (by this virtual router).
Out Request
The number of ARP request packets sent (by this virtual router).
Out Response
The number of ARP reply packets sent (by this virtual router).
Failed requests
The number of failed ARP requests sent (by this virtual router).
Proxy Answered
The number of ARP requests answered by the ARP proxy.
