show switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
107
Output from this command on the modular switches looks similar to the following:
SysName: BD-10808
SysLocation:
SysContact: [email protected], +1 888 257 3000
System MAC: 00:30:48:41:ED:45
SysHealth check: Enabled
Recovery Mode: None
System Watchdog: Enabled
Current Time: Wed May 19 11:04:32 2006
Timezone: [Auto DST Enabled] GMT Offset: -480 minutes, name is PST.
DST of 0 minutes is currently in effect, name is PDT.
DST begins every first Sunday April at 2:00
DST ends every last Sunday October at 2:00
Boot Time: Sat May 15 17:19:29 2006
Next Reboot: None scheduled
MSM: MSM-A * MSM-B
------------------------ ------------------------
Current State: MASTER INIT
Image Selected: primary
Image Booted: primary
Primary ver: 11.5.1.0
Secondary ver: 11.5.1.0
Config Selected: primary.cfg
Config Booted: primary.cfg
primary.cfg Created by ExtremeWare XOS version 10.2.0.14
223 bytes saved on Fri May 14 13:36:37 2004
Output from this command on the stand-alone Summit X450 series switch looks similar to the
following:
SysName: SummitX450-24x
SysLocation:
SysContact: [email protected], +1 888 257 3000
System MAC: 00:04:96:1F:A5:3E
Recovery Mode:
All
System Watchdog: Enabled
Current Time: Sat April 14 04:57:33 2006
Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time: Fri April 13 23:57:48 2006
Next Reboot: None scheduled
Current State: OPERATIONAL
Image Selected: primary
Image Booted: primary
Primary ver: 11.5.1.0
Secondary ver: 11.5.1.0
